Grabo Pro Lifter 20
The battery-powered GRABO Pro Lifter 20 makes it simple to lift and move heavy materials so you can say goodbye to bulky, complex heavy-lifters and unreliable suction cups. Equally as effective on smooth materials as it is with coarse surfaces, the Pro Lifter has a pumping capacity of 20 liters per minute along with a smart digital pressure sensor, digital display, and smart settings for both weight and pressure. With GRABO Pro, you can double your work efficiency with enhanced safety.
The GRABO Pro is equipped with a robust vacuum pump and strong foam rubber seal that's resistant to pressure loss. Once the pump is activated, it creates strong suction to hold loads as heavy as 375 lb. Unlike other oversized moving solutions, GRABO tool is both portable and convenient. The ergonomic design provides better grip and less fatigue when moving heavy objects. It's an effective vacuum lifter even for dusty, semi-porous, or rough surfaces so you can lift everything from glass and ceramic tiles, to wood, metal, and other materials. The powerful vacuum pump and rechargeable battery pack are both concealed within the grab handle to keep everything compact in one sleek design.
GRABO's handle is equipped with a digital display that shows the maximum weight it can safely lift at that very moment in both pounds and kilograms. The addition of a smart digital pressure sensor makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated for the optimum level of suction. The sensors digitally detect and maintain the required pressure for complete control while transferring the object for precision handling and installation without too much of a hassle. The sensor automatically stops the pump upon reaching maximum vacuum capacity of 11.6 PSI.
In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro monitors the vacuum so if pressure is lost, the pump will automatically power up until the pressure is restored. If you want to lift and move objects that have lighter mass, you can use it without vacuum pump. When you want to remove the tool from the object, simply push the red vacuum release button.
GRABO Pro-Lifter comes as a complete unit with pre-installed battery and vacuum seal. Just like the Classic model, the PRO version is equipped with four lifting lugs placed on both sides of the grab handle in case the tool needs to be used with additional grips or straps for support. The GRABO Pro has been rigorously tested by professionals around the world. With a compact design and competitive performance, the it's no wonder it's rapidly becoming a tool of choice in homes and throughout the construction industry around the world.
11.7"L x 7.1"W x 4.5"H
— Warranty: Manufacturer's 1 Year
— Battery Type: 14.8VDC 2600mAh Li-ion
— Rated Power: 16W
— Charger Input Voltage: 100-240VAC 50/60Hz
— Battery Charging Time: ~2 hrs
— Non-Stop Running Time (Full Charge): 1.5 Hours
— Running Cycles (On Full Charge): 900 ON-OFF Cycles of 10 Seconds
— Stand-by Mode (Charge Hold): 30 days
— Pump Service Life: 100,000+ ON-OFF Cycles / 800+ Hours Continuous
— Rated Air Flow: 0.7cfm (20 L/min)
— Maximum Vacuum Rate: 11.6Psi (0.8 Bar, 80 kPa)
— Maximum Lifting Capacity: 375 lb (170 kg)
— Net Weight (With Battery): 3.2 lb
— Working Temperature: 32°F~140°F ( 0°~60 °C )
— Applicable Surface Type: Peak/valley heights less than 0.1” (3mm), arc less than 5°
— Additional Features: Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar )
— Unit Weight: 5 lb
— 1 GRABO Pro Tool (2021 Model With Digital Display)
— 1 Multi-socket Charger
— 2 Seals (Pre-installed On The Tool)
— 1 Battery (Pre-installed On The Tool)
— 1 Tough Oxford Fabric Carry Bag
— Operator’s Manual In English
The tile and stone industry is our main market. The Grabo can safely hold stone, pavers, granite slabs etc up to 375 lbs with one Grabo unit. The Grabo can hold almost any material that isn't too porous.How much does it weigh?
The Grabo unit weighs 5 lbs.Can I use it to climb up walls?
No, it cannot be used to climb up walls.Can it be used to lift drywall/sheet rock?
Yes, it works on drywall. It doesn't get as strong as suction as a more dense material because drywall is very porous, but it still works great and you can get a good lift on drywall.
Shipping AvailabilityCanada, United States
Shipping PolicyStandard Ground Shipping
Ship In1-5 business days
Return PolicyFinal sale, not eligible for return or cancellation